 Download
Spec Sheet
|
The Model 409 VLF-HF Multicoupler is a compact broadband unit
which permits up to 16 receivers (409-02) or eight receivers (409-03)
to be coupled to a single antenna. A low noise input amplifier
provides a nominal gain of 5 dB and achieves a wide dynamic range
over a broad band covering the VLF and HF bands. Input circuitry
provides protection under high ambient RF field conditions or
from nearby lightning strikes. |
Download
Spec Sheet |
The Model 410 HF Multicoupler is a compact unit which allows
coupling of up to sixteen HF Receivers to a single antenna or to
one of two switch selectable antennas. A low noise input amplifier
provides a nominal gain of 5 dB and achieves a wide dynamic range
over the entire HF band. |
Download
Spec Sheet |
The Model 410VXI HF Multicoupler is a compact unit which allows RF energy from a single antenna to be distributed to up to eight HF Receivers. A low noise input amplifier provides a nominal gain of 5 dB and achieves a wide dynamic range over the entire HF band. Input circuitry provides protection under high ambient RF field conditions or from nearby lightning strikes
|
Download
Spec Sheet |
The Model 414 VHF/UHF Multicoupler is a compact unit which allows
up to 14 VHF/UHF receivers to be coupled to a single antenna or
to one of two switch selectable antennas. The input signal drives
a wideband amplifier which achieves wide dynamic range and high
isolation with amplifier gain sufficient to overcome incidental
losses. |
Download
Spec Sheet |
The Model 418 VHF/UHF (20 to 3000 MHz) Multicoupler is our latest
broadband, high performance unit designed for compatibility with
wide frequency range receiving systems requiring up to eight outputs
from a single antenna input. |
Download
Spec Sheet |
The Model 418VXI VHF/UHF (20 to 3000 MHz) Multicoupler is our
latest broadband, high performance unit designed for compatibility
with wide frequency range signal collection and signal analysis
systems requiring up to eight outputs from a single antenna input. |
Download
Spec Sheet |
The Model 510 Microwave (0.5 to 18 GHz) Multicoupler series
is our latest broadband, high performance unit designed for compatibility
with wide frequency range receiving systems requiring up to eight
outputs from a single antenna input. |
|
Download
Spec Sheet |
The Model 417VXI covers the 30 to
6000 MHz frequency range. The use
of a wideband, high dynamic range
amplifier results in minimum distortion
over the specified frequency range
and gain sufficient enough to overcome
incidental losses. The Model 417VXI
is available with eight outputs in
a VXI chassis permitting convenient
side-by-side installation.
This multicoupler is also available
in a 1U, half-rack configuration and
has the same specifications as the
417VXI with the excepetion of input
power. The half-rack configuration
is powered from the ac mains. |
)
)
)
)
){kind=small}
){kind=small}
){kind=small}
){kind=small}